блог
Dec10.2020
The steel structure is made of many different materials. Hanau Building Design steel structure processing professionals report whether the quality of our steel structure can be distinguished from the steel structure processing materials, so the request is relatively high. So are the steel structure processing materials required high?
1. Steel for steel structure, welding materials, coating materials and fasteners should have quality certificates, and must meet design requirements and current standards.
2. The raw materials, including the manufacturer’s quality certificate, shall be witnessed, sampled, sent, inspected and inspected in accordance with the requirements of the treaty and relevant standards, and the inspection record shall be constructed. And provide inspection report and monitoring to Party A.
3. In the process of processing, if the original material is found to be defective, the inspector and the competent technician must conduct research and punishment.
4. The production unit shall use the material certificate (technical approval sheet) application in advance, which shall be replaced by Party A and the supervisor after verification.
5. It is strictly forbidden to use drugs or rusty soldering or damp agglomeration to melt solder and rusty wires. For stud welding studs, the appearance should not affect the use of cracks, streaks, dents and burrs.
6. Conduct intensive management of welding materials and establish a dedicated stack. The library should be dry and ventilated.
7. The bolts should be stored in a dry and ventilated room. The acceptance of high-strength bolts should be designed, constructed and accepted according to the current national standards. Examples of high-strength bolts for steel structures are not used, such as rust, stains, moisture, scratches, and mixed batches.
8. The paint should meet the design requirements and be stored in a dedicated stack. Paint that is outdated, deteriorated, or adhesive failure must not be used.
9. Qualified steel structure materials have good plasticity and toughness and large deformation. It can withstand dynamic loads very well, making the steel structure more reliable.
Hanau Building Design is a professional company that provides comprehensive architectural design services. The service areas involve architectural design, structural design and engineering production and installation consulting, etc., which feature different forms of steel structure design, include:Steel structure workshop, Steel Structure,Light Steel Villa,Prefab villa,Container house,Living Container house,resort hotel,Steel structure small high-rise apartment,Hotel. Welcome new and old customers to call or email us to discuss cooperation, thank you.
строительство стальных конструкций - это легкая, надежная схема строительства.Она имеет много достоинств, но многие не понимают ее.в связи с этим, ООО « ханау» планирует построить стальную конструкцию в китае, чтобы подробно осветить связанные с этим вопросы:
Китайская компания по проектированию зданий стальных конструкцийстроительство стальных конструкций должно быть установлено, во - первых, рама установки, во - вторых, качество строительства стальных конструкций также является довольно напряженным, во - вторых, безопасность строительства.для обеспечения безопасности персонала на строительной площадке и безопасности оборудования в процессе монтажа в процессе строительства после завершения строительства качество оборудования обеспечивает безопасность пользователей оборудования и безопасность его внутреннего имущества.Поэтому нельзя допускать небрежности и небрежности при строительстве оборудования.
Price Your Building
Enter your details below and we will get back to you
with a price estimate for your building
project.
Width
Length
Height
First Name
Last Name
Phone
Company
Industry
Timeframe
Postal
Country
Building Use
сяошань, ханчжоу, провинции чжэцзян
связаться с нами
